AiM Formula Steering Wheel 3
Formula Steering Wheel 3 has an illuminated graphic display (96 x 46 mm), which enables the display of engine speed, speed, lap time, gear, temperatures and pressures. Eight display pages can show up to four channels each.
The AiM Formula Steering Wheel 3 supplied in an aluminum housing (270 x 183 x 48.2 mm) can be connected to evo4s and evo5 via a 5-pin binder connector or a 19-pin ITT connector. The grip area is padded and covered with suede. With the 19-pin ITT plug version, the four green buttons for e.g. radio, speed limiter, launch control, drinking bottle, map selection or similar can also be assigned and used.
In the so-called data recall, you get detailed information on each lap with the highest / lowest speed and engine speed as well as a histogram where you can see the constancy of the individual laps.
There are four RGB alarm and six RGB switching lights on the Formlua Steering Wheel 3. These can be configured via RaceStudio3. Optionally, paddles can be connected to this steering wheel to shift gears.
Technical data
Special features of steering wheel 4
Tachometer | Tap from the control unit, terminal 1 of the ignition coil or CAN/OBDII Measuring range 0 to 22,000 rpm End of scale adjustable (x 1000): 4 - 6 - 7 - 8 - 10 - 12 - 14 - 15 - 16 - 18 - 20 - 22 Sampling rate 10 - 50 Hz, freely selectable Freely configurable over-revs control LED |
Timing | Triggering via GPS Lap times without limits, up to 5 split times Measuring accuracy 1/100 sec. Lap time forecast |
Analog channels | Optionally expandable through channel expansion Optionally expandable with Thermocouple Hub 4 RGB alarm LEDs when the set alarm values are exceeded or undershot Display in °C or °F Sampling rate 1 – 200 Hz, freely selectable |
speed | Recording CAN and GPS 0 – 438, display in km/h or mph Sampling rate 10 - 50 Hz, depending on the protocol |
Gear indicator | Calculated from speed and speed. |
Sum sampling rate | 8950 Hz (without ECU) |
Plug | 1x Autosport 22 pin | Souriau 8STA61235SN | German AS61235PN 1x Mini USB on the cable harness |
Shift light | 8 freely configurable RGB LEDs freely configurable for each gear |
Additional functions |
Display of the difference to the fastest lap in the intermediate times |
Data transfer | USB |
Power supply | via 12V on-board network On/Off via ignition switch no data loss after switching off |
Updates | Software and firmware updates free of charge via the Internet |
dimensions | Case: 270 x 183.5 x 42.6 mm Display: 95x 53.9 mm |
Weight |
2400 gr |